PRODUCT SELECTION GUIDE

This Selection Guide illustrates our product line available for your R&D applications.
We welcome the opportunity to serve you.

CAMAC PRODUCTS

MODEL	FUNCTION	# OF CHAN	RATE MHz	DESCRIPTION
7106	DISCRIMINATOR LATCH	16	140	A high performance discriminator and latch combined in a single-width CAMAC module. The latching feature is extremely useful for holding discriminator output patterns to perform fast trigger processing. Other features include a linear sum output, veto input and manual or programmable operation; ECL outputs.
7120	PRECISION CHARGE SOURCE / TIME INTERVAL PULSER	1	10 KHz	Provides an easy to use, accurate method to test and calibrate charge ADC's and TDC's under actual experimental conditions. Outputs programmable from 10 fC or 10 pSec least count and full scale ranges of 600 pC or 10 µSec; BNC connectors.
7126	LEVEL TRANSLATOR	16	DC to 150	Only translator to convert all three logic families: NIM, ECL, and TTL. DC-150 MHz for NIM and ECL, DC-100 MHz for TTL translations. In addition, a logical "OR" is possible for the ECL and NIM/TTL inputs.
7132 7132H	PRESETTABLE SCALER	32	225	The only 32 channel 225 MHz scaler available in a single-width CAMAC module. It features 24 or 48 bit operation, fast clear, inhibit, test and preset functions. Has ECL or NIM/TTL inputs, Lemo or header connectors.
7145	LINEAR GATE MULTIPLEXER	8	DC to 250	Eight independent analog switches accept bipolar inputs and produce two analog outputs. They are gated by NIM, TTL, ECL logic or via CAMAC control. Solid state switching under 2nSec allows routing of detector pulses, clipping, waveform sampling and multiplexing. Packaged in a single-width CAMAC module.
7157	MIXED LOGIC UNIT	8	150	A double-width CAMAC module which performs logical 'OR' with NIM or TTL inputs. Easily configured 16, 8, 4, or 2 inputs. See NIM Model 757 for more details.
7164 7164H	PEAK-SENSE ANALOG-TO-DIGITAL CONVERTER	16	------	Sixteen fast peak ADC's in a single-width CAMAC module. Features 12-bit dynamic range and <7.2 µSec conversion time, choice of input range, polarity and impedance. Digital processing for pedestals, lower and upper threshold. Choice of Lemo or header connector.
7166 7166H	CHARGE-TO-DIGITAL CONVERTER COMMON GATE	16	------	Sixteen charge ADC's in a single-width CAMAC module. Features 12-bit dynamic range, 512 pC full scale, and <7.2 µSec conversion time. Also has fast clear, test, and digital processing for pedestals, lower and upper threshold. Choice of Lemo or header connector.
7167 7167H	CHARGE-TO-DIGITAL CONVERTER INDIVIDUAL GATES	16	------	Sixteen charge ADC's with individual gate inputs in a double-width CAMAC module. Has all the features of the Model 7166. Choice of Lemo or header connectors.
7171	VARIABLE GAIN AMPLIFIER	4	DC to 300	Features variable gain from 1X to 10X; bandwidth independent of gain. Has all features of Model 771 in a single-width CAMAC module.
7176	PHOTOMULTIPLIER PREAMPLIFIER	16	DC to 275	Single-width CAMAC module containing sixteen preamps each with 10X voltage gain. Designed for fast photomultiplier tube detectors in systems not requiring NIM instrumentation.
7177	VARIABLE GAIN PREAMPLIFIER	8	DC to 200	A single-width CAMAC module. Each channel has adjustable gain and offset, and has two outputs. Gains variable from 2 to 50 with no degradation of bandwidth.
7186 7186H	TIME-TO-DIGITAL CONVERT. COMMON START OR STOP	16	------	Features 25 pSec resolution, <7.2 µSec conversion, and 12-bit dynamic range. Individual channels can be programmed for pedestal correction and lower and upper thresholds with built-in calibration. Choice of Lemo or header connectors.
7187 7187H	TIME-TO-DIGITAL CONVERT. INDIVIDUAL START & STOP	16	------	Sixteen individual TDC's in a double-width CAMAC module. Includes all features of our Model 7186. Choice of Lemo or header connectors.
7192	NSEC DELAY UNIT	2	DC to 1 GHz	Double-width CAMAC module with all features of our popular NIM Model 792. Generates delays from 500 pSec to 63.5 nSec.
7194	GATE/DELAY GENERATOR	4	0.1 Hz to 20	Double-width CAMAC module with all features of our popular NIM Model 794. Generates delays from 50 nSec to 10 Sec. Has NIM, TTL, and ECL outputs.

LINEAR AND AMPLIFIER PRODUCTS, NIM AND SINGLE-CHANNEL UNITS

Model	Function	Rate MHz	# Of Chan	Voltage Gain	RMS Noise (Typ.)	# & Type Of Outputs	Special Features
740	LINEAR LOGIC FAN IN/OUT	DC to 250	4	1	400 µV	6 Outputs 4 Non-Inv 2 Inverting	Linear summation of inputs
		Allows linear summing in nanoseconds of levels and pulses for easy formation of complex analog triggers.
744	LINEAR GATE FAN IN/OUT	DC to 250	4	1	500 µV	6 Outputs 4 Non-Inv 2 Inverting	Gated linear summation of inputs
		Four independent fast analog switches with linear fan in/out. Ideal for fast analog mux/demux analog gating.
748	LINEAR/LOGIC FAN OUT	DC to 250	8	1	250 µV	4 Non-Inv	±250 mV offset
		Analog fan out for fast detector signal to simultaneously drive discriminators, A/D converters, transient recorders & other data acquisition systems.
770 772	FIXED GAIN AMPLIFIER	DC to 300	4 8	10	25 µV	2 Bridged Non-Inv	±250 mV Offset
		Fast, low cost amplifier block. Channels can be cascaded for gains in excess of 500
771	VARIABLE GAIN AMPLIFIER	DC to 300	4	1 to 10	Gain 10: 25µV Gain 1: 250µV	1 Output Non-Inv	±250 mV Offset
		General purpose fast pulse or CW amplifier. Ten position switch selects gains 1 to 10 with full bandwidth.
774	PULSE AMPLIFIER	100 KHz to 1.8 GHz	4	Gain 5 or 10 Gain 20 or 50	40 µV	1 Linear	Non-Inverting
775	PULSE AMPLIFIER	100 KHz to 1.8 GHz	8	Gain 5 or 10 Gain 20 or 50	40 µV	1 Linear	Non-Inverting
776	PHOTO- MULTIPLIER PREAMP	DC to 275	16	Fixed 10	25 µV	2 Non-Inv	Internal Offset ADJ.
		Low cost per channel, high density photomultiplier preamp. Sixteen-channels in a single-width NIM.
777	VARIABLE GAIN PREAMP	DC to 200	8	Continuous 2 to 50	Gain 50: 25 µV Gain 2: 100 µV	2 Non-Inv	Front-Panel Offset ADJ.
		High performance octal photomultiplier preamp with adjustable gain. DC offset control via front panel.
778	Sixteen Channel Version of the Model 777 in Single Width NIM; (See Model 777 specifications above).
779	Thirty-two Channel Version of the Model 776 in Single Width NIM; (Same performance as Model 776 above)
6931	DC-100 MHz Single Channel Bipolar Amplifier; 100X Voltage Gain. Noise less than 10µV RMS.
6950	DC-300 MHz Single-Channel Bipolar Amplifier; 10X Voltage Gain, (See Model 770 for specs.)
6954	100 KHz to 1.8 GHz Bipolar Preamplifier. Single Channel version of Model 774. Available with BNC or SMA connectors.					Gain 5 or 10 Gain 20, 50, or 100
6955	20 MHz to 700 MHz Timing/Charge Pick-Off Preamplifier. Available with BNC or SMA connectors.					Gain 5 or 10 Gain 20, 50, or 100
5010	Rotary Step Attenuator Variable from 0.1 to 1.0. Range DC to 1 GHz. Choice of LEMO or BNC connectors.					Single Channel
804	Rotary Step Attenuator variable from 0.1 to 1.0. Range DC to 1 GHz. Choice of LEMO or BNC connectors.					Four Channel NIM

DISCRIMINATORS, NIM AND SINGLE-CHANNEL UNITS

Model	Function	Rate MHz	# Of Chan	Variable Threshold	Variable Output Width	Updating Outputs	# & Type Of Outputs	Special Features
704	LEADING EDGE DISCRIMINATOR	300	4	-10mV to -1V	2nS to 50nS	Yes	6 Outputs 2 Pairs Bridged 2 Complement	Veto
704	LEADING EDGE DISCRIMINATOR	The fastest discriminator available. Ideal for fast solid state and microchannel plate detectors.
705	LEADING EDGE DISCRIMINATOR	75	8	-10mV to -1V	6nS to 150nS	No	3 Outputs 1 Pair Bridged 1 Complement	Linear Summed Output
705	LEADING EDGE DISCRIMINATOR	A low cost, high performance discriminator without sacrificing features such as veto and linear summing.
706	LEADING EDGE DISCRIMINATOR	100	16	-10mV to -1V	5nS to 150nS	No	2 Outputs 1 Pair Bridged	Fast Veto
706	LEADING EDGE DISCRIMINATOR	The only 16 channel discriminator available in a single-width NIM.
707	LEADING EDGE DISCRIMINATOR	100	16	-10mV to -1V	5nS to 150nS	No	1 NIM Output 1 Differential ECL Output	Fast Veto
707	LEADING EDGE DISCRIMINATOR	A 16 channel Discriminator with NIM and Differential ECL Outputs in a single-width NIM.
708	LEADING EDGE DISCRIMINATOR	300	8	-10mV to -1V	2nS to 50nS	Yes	3 Outputs 1 Pair Bridged 1 Complement	Fast Veto
708	LEADING EDGE DISCRIMINATOR	Only Phillips Scientific offers this high rate performance octal 300 MHz discriminator.
710	LEADING EDGE DISCRIMINATOR	150	8	-10mV to -1V	4nS to 150nS	Yes	1 Pair Bridged 1 Normal NIM 1 Complement	Linear Summed Output
710	LEADING EDGE DISCRIMINATOR	Versatile octal discriminator with four outputs per channel, individual thresholds and output width controls with veto & linear summed output.
711	LEADING EDGE DISCRIMINATOR	150	6	-10mV to -1V	4nS to 1 µS	Yes	5 Outputs 2 Pairs Bridged 1 Complement	Burst Guard Mode
711	LEADING EDGE DISCRIMINATOR	General purpose discriminator, outputs to 1 µsec and features time-over-threshold operation.
715	CONSTANT- FRACTION TIMING DISCRIMINATOR	100	5	-25mV to -1V	5nS to 150nS	No	3 Outputs 2 Normal NIM 1 Complement	Constant Fraction Timing
715	CONSTANT- FRACTION TIMING DISCRIMINATOR	Low cost five-channel timing discriminator with non-updating outputs, which insure accurate counting and time measurements to over 100 MHz.
730	Delta E WINDOW DISCRIMINATOR	100	5	LLT = -10mV -1V ULT = -25mV -1V	5nS to 150nS	No	3 Outputs 2 Normal NIM 1 Complement	Leading Edge Delta E Window ARC Modes
730	Delta E WINDOW DISCRIMINATOR	Five fast SCA's in a single-width NIM. Ideal for making prompt energy cuts for fast triggers.
6816	16-Channel Amplifier/Discriminator Card, ECL Outputs. Drift Chamber/MWPC or Multi-anode MCP Front-End.
6904	Single Channel 300 MHz Discriminator; (See Model 704 specs.)
6908	Single Channel 300 MHz Amplifier/Discriminator; Similar to Model 6904 with -1mV to -100 mV Threshold.
6915	Single Channel Constant-Fraction Timing Discriminator; (See Model 715 specs.)
6930	Single-Channel Analyzer/Window Discriminator; (See Model 730 specs.)

NIM LOGIC UNITS

Model	Function	Rate MHz	# Of Chan	Logic Threshold	Variable Output Widths	Updating Outputs	# & Type Of Outputs	Special Features
726	LEVEL TRANSLATOR	150	16	NIM, TTL, ECL	Output = Input	No	1 TTL 1 Pair Bridged 1 DIFF ECL	Logical "OR"
752	TWO INPUT AND/OR LOGIC	150	4	NIM -500 mV	4nS to 1 µS	Yes	6 Outputs 2 Pairs Bridged 2 Complement	Common Veto
754	FOUR INPUT MAJORITY LOGIC	300	4	NIM -500 mV	2nS to 50nS	Yes	5 Outputs 2 Pairs Bridged 1 Complement	Veto/Chan Logic Fan- IN/OUT
755	FOUR INPUT MAJORITY LOGIC	150	4	NIM -500 mV	4nS to 1 µS	Yes	5 Outputs 2 Pairs Bridged 1 Complement	Veto/Chan Logic Fan- IN/OUT
756	FOUR INPUT MAJORITY LOGIC	300 150	4	NIM -500 mV	Input Overlap Time 4nS - 1 µS	Overlap Yes	5 Outputs 2 Pairs Bridged 1 Complement	Veto/Chan Overlap Outputs & Updating
757	MIXED LOGIC UNIT SWITCH SELECTED	150	8	TTL/NIM -500 mV +1.5 V	Overlap of Inputs	No	6 Outputs 2 Pairs Bridged 2 Complement	LED Set-Up Indication
758	TWO INPUT AND/OR LOGIC	150	8	NIM -500 mV	4nS to 150nS	Yes	3 Outputs 1 Pair Bridged 1 Complement	Common Veto

NIM DELAY AND GATE GENERATORS

Model	Function	Delay Time	# Of Chan	Description	# & Type Of Outputs
792	NSEC DELAY UNIT	.5 nS to 63.5 nS	2	Independent switched cable delays. Both BNC and Lemo inputs and outputs.	1 Lemo 1 BNC
794	GATE/DELAY GENERATOR	50 nS to 10 Sec	4	Four completely independent gate/delay generators in a single-width NIM. TTL and NIM trigger input, inhibit, and reset. Delay remotely programmable with 0 to 10V input.	5 Outputs 1 TTL, 1 ECL 3 NIM Levels

ACCESSORIES

417	NIM Pocket Pulser; Simulates Fast Photomultiplier Pulse; 1.5nSec Risetime, 10KHz Rate
425	In-Line Isolation Transformer; 250KHz to 250MHz Bandwidth, Female BNC or Lemo Connectors
433	NIM to CAMAC Adapter; Provides NIM Capability in CAMAC Crates
460	Inverting Pulse Transformer, BNC Male to BNC Female, 500 KHz to 1.2 GHz Bandwidth
6606	Plug-In Power Supply for 6900 Series, 115VAC 60Hz Input, ±12V at ±200mA Output
6670	Plug-In Power Supply for 6900 Series, 240VAC 50Hz Input, ±12V at ±200mA Output

Consult Factory for Quantity Discounts, Delivery, and Available Options.

          MasterCard and Visa accepted.
          Open account terms: Net 30 days.
          All prices are quoted F.O.B. Mahwah, New Jersey.
          All products are covered by a one year warranty.

Phillips Scientific
A Theory Development Company
31 Industrial Avenue,
Suite 1
Mahwah, New Jersey 07430

Tel: (201) 934-8015
Fax: (201) 934-8269
Email: sales@phillipsscientific.com